EG100 EV Clamp
EG100 EV CLAMP
Accurate & Safe & Stable
EG100 is a current clamp for the detection of electric vehicles. It needs to be used with Launch scanners for data display side use. The current clamp has small volume, high accuracy and stable performance, and supports AC/DC current test and DC voltage test.
FEATURES
DC Voltage/Current Testing
-
Designed for EV, and simultaneous measurement of current and voltage.
-
Supports measurement range selection.
-
Supports real-time test value digital display.
-
Supports maximum, minimum, and peak-to-peak value display.
-
Record and playback the measurement waveform.
AC Current Test
-
Display AC Lower current data.
-
Supports measurement range selection.
-
Supports real-time test value digital display.
-
Supports maximum, minimum, and peak-to-peak value display.
-
Record and playback the measurement waveform.
SPECIFICATION
| Best Mode | Clamp CT, non-contact measurement |
| Battery | 9V dry battery |
| Phase Error | ≤3°(AC 50Hz/60Hz, 23°C±2°C) |
| Frequency Response | DC-50kHz |
| Accuracy | ±3%FS(23°C±5°C,＜75%rh) |
| Jaw Size | φ16mm×18mm (outer diameter of clampable wire) |
| Input Measuring Range | 0-200A AC/DC |
| Resolution | 1mA AC/DC |
| Output Gear | 10mV/A (0~20 A), 100 mV/A(0~200 A) |
| Working Current | 500mA |
| Working Temperature | 0-50°C |
| Zero Adjustment |
The ZERO button can be used for zero adjustment to eliminate the interference of geomagnetic field and external electric field |
| Dimension | 278*71*37(mm) |
.png)
.png)
.jpg)
.png)
